7. When working in the unlock state, the LCD displays “ ”. At the moment,
whatever is in the work state or in the sleeping state, the system can switch
channel and change parameter values, and work in the different channel “CH0”
or “CH1” or “CH2” or “CH3”with different parameter values. The setting
method refers to “6.4 magnetic switch control”.
8. If the LCD displays “ ”, means it has set the sound. And the system will sound
“di-di-” at the last 5minutes before finishing the work.
Note:
When the time parameter window displaying “---”, it means the
system will be in the work state and without work time limited.
Base on the system can fulfill the soldering or desoldering, using as
low temperature as possible and as big airflow as possible for
prolonging the heater’s life and protecting the element.
It must switch off the power supply if not using in a period of time.
When the unit can be controlled by the pedal switch, it must do set
“
”
in the menu setting.
Ⅶ
. Sleeping
7.1 How into the Sleeping State
1.
When the work time counting down finishes, the system will come
automatically to the sleeping state.
2.
Put the handle on the handle holder, the system will come automatically to the
sleeping state.
3.
If the system is controlled by pedal switch, when springing the pedal switch in
the work state, the system will come to the sleeping state.
4.
During the system from work state to sleeping state, the time parameter
window will display “OFF”. and then when the temperature cooling down to
100
℃
, the unit comes into the sleeping state. In the sleeping state, the LCD
will display “
” and “---”.
6.2 Airflow Setting
Raise Airflow:
Click
“AIR
▲
” key
and then the airflow grade will rise 1, and the
LCD displays the current setting airflow grade. If pressing “AIR
▲
”not loosely at least one second, the setting airflow grade will
rise rapidly. Loose the “AIR
▲
”key until up to the needed airflow
grade.
Reduce Airflow:
Click
“AIR
▼
”
key and then the airflow grade will drop 1, and
the LCD displays the current setting airflow grade. If pressing
“AIR
▼
”not loosely at least one second, the setting airflow grade
will drop rapidly. Loose the “AIR
▼
”key until down to the
needed airflow grade.
6.3 Work Time Setting
Raise Time:
Click
“INFO” key and “TEMP
▲
”
key at the same time and then the
work time will rise 1 second, and the LCD displays the current setting
work time. If pressing “INFO” key and “TEMP
▲
”key not loosely at
least one second, the setting work time will rise rapidly. Loose the
“INFO” key and “TEMP
▲
”key until up to the needed time.
Reduce Time:
Click
“INFO” key and “TEMP
▼
”
key at the same time and then
the work time will drop 1 second, and the LCD displays the current
setting work time. If pressing “INFO” key and “TEMP
▼
”key not
loosely at least one second, the setting work time will drop rapidly.
Loose the “INFO” key and “TEMP
▼
”key until down to the
needed time. If pressing “INFO” key and “TEMP
▼
”key not
loosely until the LCD displays “---” at the time parameter, it means
the system is not controlled by work time and will continually
work until the system is forcible into the sleeping state.
Note: Only in the unlocking state, the system can change the values of
temperature, airflow and work time. The parameter values cannot
be set when displaying “OFF” or in the lock state.
Page6
Page9
