. SA
Ⅰ
FETY INSTRUCION
To prevent accidents, be sure to observe the following precautions:
1.
Use the unit only in the described manner as the manual.
2.
The air outlet and its surrounding area maybe very hot. Please take great
care and not to be burned.
3.
After work, the handle must be placed on the holder and never place the
handle on the workbench or other places. The unit can be turned off only
after it cools below 100
℃
(sleeping mode) automatically.
4.
Please keep the air outlet clear and not be blocked.
5.
Do not place the sharp object besides or on the tube.
6.
Keep the air outlet at least 2mm from the object.
7.
Select the appropriate nozzle according to demands. Differences in
temperature may exist when different nozzle is used.
8.
Turn off the power switch if not using in a period of time. Disconnect the
power cord when not in use for a long time.
9.
Handle with care not to shock the unit sharply.
10.
A periodically maintenance of the unit is necessary.
11.
Don’t operate the unit with wet hand or when the power cord is damp to
avoid short circuit or electric shock.
12.
Never use this unit in flammable gases or near other flammable materials.
After using, don’t put it near the flammable gases or materials.
13.
Some areas such as behind walls, ceilings, floors, and other panels may
contain flammable materials which may not be found. The ignition of
these materials could result in property damage and injury to persons.
When working in these locations, move the handle back and forth and not
pause at one point for protecting the flammable materials from ignition
and other things from damage.
14.
Children cannot recognize the danger of the electrical appliance and keep
the unit out of reach from children.
Handle cover for preventing burned
Handle cover
Handle cord
Heater element assembly
Page1
Page14
