SMC Sierra Monitor FS-8704-14, Руководство пользователя

Страница: 9 / 42

EtherNet/IP Driver Manual
Page 9 of 42
5.2 Client Side Node Parameters
Section Title
Nodes
2
Column Title Function Legal Values
Node_Name Provide name for node.
Up to 32 alphanumeric
characters.
IP_Address Address of Server. Any valid address on subnet.
Protocol Specify protocol used. EtherNet/IP
Adapter Specify port Adapter used. N1, N2
1
Plc_Type*
Specify the type of remote PLC. Only required
for PCCC Services.
MicroLogix, SLC5, PLC5
EIP_Cache_Connection*
Specify if connection to remote server should
be reused or closed after every data transfer
transaction.
YES , NO
EIP_Skip_Cmd*
Some devices do not support all 'under the
hood' commands specified by the EIP driver.
Specify the command that should not be
issued by the FieldServer.
-, LIST_IDENTIFY
Example
// Client Side Nodes
Nodes
Node_Name , IP_Address , Adapter , Protocol
PLC 1 , 192.168.1.174 , N1 , EtherNet/IP
5.3 Client Side Map Descriptor
5.3.1 FieldServer Related Map Descriptor Param eters
Column Title Function Legal Values
Map_Descriptor_Name
Name of this Map
Descriptor.
Up to 32 alphanumeric characters.
Data_Array_Name
Name of Data Array where
data is to be stored in the
FieldServer.
One of the Data Array names from Section
4 .
Data_Array_Offset
Starting location in Data
Array. 0 to (Data_Array_Length -1) as specified in
Section 4 .
Function
Function of Client Map
Descriptor.
Rdbc, Wrbc, Wrbx
NOTE: It is possible with Data Table Read on
the Client side to read and write to the same
tag by using the "Write Thru" property of the
Rdbc function.
2
Only one explicit connection is created per node. All explicit Map Descriptors for that node will use the same explicit connection.