SMC Sierra Monitor FS-8704-14, Руководство пользователя

Страница: 22 / 42

EtherNet/IP Driver Manual
Page 22 of 42
Step 4: Configure the properties for the two message block
s by clicking on the “…” button.
Read Message Block
Write Message Block
Communication Tab (for both message blocks)
NOTE:
•
A message block only executes on the leading edge of a rung condition.
•
No more than one message block executes at a time.
Step 5: Download the program and set the PLC to Run Mode.
Remote FieldServer tag configured in the
FieldServer (see example above).
Local PLC tag configured in the PLC tag
list (see example above).
Local PLC tag configured in the
PLC tag list (see example above).
Remote FieldServer tag configured in
the FieldServer (see example above).
Number of points transferred from
FieldServer to PLC regardless of
tag and array sizes.
Number of points transferred from
PLC to FieldServer regardless of
tag and array sizes.
EIP_Card is the name of the Ethernet ENBT
Card in the ControlLogix Rack.
“2” refers to the
port number on the ENBT Card. 192.168.1.75 is
the IP Address of the FieldServer.
The tag tab requires no configuration.
Uncheck for ‘UnConnected’ communication to FieldServer.