-14-
No. TQ1230001-OM101-A
Caution
M8 tool I/O connector
entry direction
Cable entry direction of
Vacuum gripper unit
Vacuum gripper direction can be changed in 90-degree increments when attached to a robot. At that
time, install it in the direction of the lower figure where the slack of the M8 connector cable is the
smallest. (the M8 tool I/O connector of the robot comes to the opposite side of the electrical entry of
the vacuum gripper unit)
If the cable is loose, it may be caught by peripheral equipment, workpiece, human body, etc. while
the robot is running, causing unexpected accidents.
