C
HAPTER
5
| LAN Settings
DHCP Settings
– 49 –
DHCP S
ERVER
The unit can support up to 253 local clients. Addresses are assigned to
clients from a common address pool configured on the unit. Configure an
address pool by specifying start and end IP addresses. Be sure not to
include the unit's IP address in the address pool range.
Figure 20: DHCP Server
The following items are displayed on this page:
◆
LAN IP Address
— Displays the LAN IP address for management of
the ADSL Router. (Default: 192.168.2.1.)
◆
Subnet Mask
— Displays the local subnet mask.
(Default: 255.255.255.0)
◆
DHCP Mode
— When set to “DHCP Server,” enables the ADSL Router to
act as a DHCP server.
◆
Interface
— Selects either the RJ-45 LAN port, or the USB port.
◆
IP Pool Range
— Configures the IP address pool for the DHCP server
and determines how many IP addresses can be assigned.
N
OTE
:
Do not enter the ADSL Router’s LAN IP address as part of the IP Pool
range.
◆
Show Client
— Displays the current DHCP client table.