![background image](http://html.mh-extra.com/html/smc-networks/rb5701-z/rb5701-z_user-manual_1300610065.webp)
Appendix A: Using the Key Pad
Page 60 | August 17, 2010
Appendix A: Using the Key Pad
A key pad is a wireless peripheral that lets you perform certain
TouchScreen functions in additional locations in your premises. For
example, you could install a key pad near a less-used entry or in an upstairs
bedroom to ensure its Emergency Alarm feature is always readily
accessible. The following TouchScreen functions can be performed from
the key pad:
Check the current system status (armed, disarmed, or ―not ready‖)
Arm the system in Arm Away mode or Arm Stay mode ( page 16
for an explanation of arming modes)
Disarm the system
Send a silent Panic alarm for police assistance.
Checking System Status
Press the
button to light the LED to show the current status of the security system. The
button lights to show the current status of the security system.
Green for three seconds if the system is disarmed.
Red for three seconds if the system is armed.
Orange for three seconds if the system is not ready to be armed (for example, a door is
open.
Arming the System
From the key pad, you can arm your system in Arm Away mode or Arm Stay. Arm Night mode must
be performed from the TouchScreen or Subscriber Portal.