SMC Networks Lochinvar FPC-N54-1998, Руководство для стартапов

Страница: 3 / 56

Lochinvar ProtoNode Start-up Guide
Page 3 of 56
Quick Start Guide
1. Record the information about the unit. ( Section 3.1 )
2. Check that the ProtoNode and customer device COM settings match. ( Section 3.3 )
3. Connect the ProtoNode 3 pin RS-485 R1 port to the RS-485 network connected to each of the
devices. ( Section
4.1
)
4. If using a serial field protocol:
Connect the ProtoNode 3 pin RS-485 R2 port to the field protocol cabling. ( Section
4.2
)
5. Connect power to ProtoNode 3 pin power port. ( Section 4.5 )
6. Connect a PC to the ProtoNode via Ethernet cable. ( Section
5
)
7. Setup Web Server Security and login via web browser. ( Section
6
)
8. Use a web browser to access the ProtoNode Web Configurator page to select the profile of the
device attached to the ProtoNode and enter any necessary device information. Once the device is
selected, the ProtoNode automatically builds and loads the appropriate configuration. (
Section
7
)
9. Ethernet Network: If using an Ethernet field protocol, use a web browser to access the ProtoNode Web
Configurator page to change the IP Address. ( Section 7.4 )