SMC Networks LFE0 Series Скачать руководство пользователя страница 9

Страница: 9 / 68

-8-

No.LFE****-OMZ0013

* Adjustment and Operation

- Check the load status before turning the power supply on.
- Do not short-circuit the load.

Although error is displayed when the product load has a short circuit, generated over current may lead to the
damage of the product.

- Do not press the setting buttons with a sharp pointed object.

This may damage the setting buttons.

- Supply the power when there is no flow.
- The product

doesn’t produce and output signal for 3 seconds after the power is supplied.

- Perform settings suitable for the operating conditions.

Incorrect setting can cause operation failure.

- Before the initial setting and flow setting, be sure to check for the influence on the other components.

Stop the control system for setting, if necessary.

- Do not touch the LCD during operation.

The display can vary due to static electricity.

* Maintenance

- Confirm safety by turning off the power supply and stopping the flow before performing maintenance.

There is a risk of unexpected malfunction.

- Perform regular maintenance and inspections.

There is a risk of unexpected failure of components due to the malfunction of equipment and machinery.

- Do not use solvents such as benzene, thinner etc. to clean the product.

This may damage the surface of the body or erase the markings on the body.
Use a soft cloth to remove stains.
For heavy stains, use a cloth soaked with diluted neutral detergent and fully squeezed, then wipe up the stains
again with a dry cloth.

Содержание LFE0 Series





































































Результаты поиска

Содержание LFE0 Series

Отзывы:

SMC Networks LFE0 Series, Руководство по эксплуатации, Страница: 9 / 68

Результаты поиска

Содержание LFE0 Series

Отзывы: