SMC Networks LFE0 Series Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 68

SMC Networks LFE0 Series Скачать руководство пользователя страница 14

-13-

No.LFE****-OMZ0013

Mounting and Installation

■

Installation

Mounting by panel mount adapter

Fix the panel mount adapter to the controller by the mounting screws M3 x 8L (2 pcs.).

Panel mount adapter (Part number: ZS-26-B)
Front protective cover (Part number: ZS-26-01)

*1: The panel mount adapter can be rotated through 90 degrees for mounting.

*2

:

The panel mount adapter should be fixed firmly with screws. Otherwise, fluids such as water may enter

After the product makes contact with the panel, the screws should be further tightened 1/4 to 1/2 turn.

Cut-out dimensions for panel mounting

*: See page 66 for panel cut-out dimensions.

How to remove the panel mount adapter

The product with panel mount adapter can be removed from the panel after removing the two screws, and by
disconnecting the hooks on both sides.
This can be done by inserting a suitable piece of thin card (as shown in the figure).
Pull the panel mount adapter to the front, and remove the flow monitor.
If the panel mount adapter is pulled forward with the hook caught, the product and the adapter may be
damaged.

«
...
12
13
14
15
16
...
»

Содержание LFE0 Series





































































Отзывы:

Нет отзывов