SMC Networks ITV SEN DUX02357 Series, Руководство по эксплуатации

Страница: 42 / 58

IN19856
- 42 - Rev 2
TYPE Hex Bits 7 - 4
Mpa 0x0 0000
kg/cm 0x1 0001
BAR 0x2 0010
PSI 0x3 0011
Kpa 0x4 0100
Counts 0x5 0101
Figure 31 - Config engineering unit types
23.3. Initial Configuration Parameters
Item Value
IP address 192.168.1.20
Subnet 255:255:255:0
DHCP Off
Enable POE Off
Enable Hold Off
Byte Swap Off
Pressure Unit Counts
Engineering Unit Counts
User Gain 8
User Sensitivity 2
Webpage ID user
Webpage Password user
Figure 32 - ITV Initial Configuration
Appendix
24. Explicit Message Example using LabVIEW™ software
It is possible to control the ITV with a LabVIEW™ software program.
The following is a simple example of a LabVIEW™ software block diagram. The program can send a
pressure or vacuum setpoint value to the ITV and will read the ITV pressure and status.
Figure 33 - Sample LabVIEW™ software Block Diagram