IN19856
- 17 -
Rev 2
Figure 8 - Example (non-POE) ITV Data and Power Connections
12.1.
SMC ITV POE Summary
The Power Over Ethernet (POE) feature is an
optional
way to power ITV units eliminating the need
to run a power cable to all ITVs. When POE is enabled, power is provided to the ITV by the “
Bus In
”
cable. The ITV factory
default
condition is
POE disabled
.
Caution
The POE on the ITV does not use the PoE 802.3 standard and therefore is not compatible
with these devices. The ITV Power Over Ethernet (POE) implementation is unique to the
SMC ITV. Do
NOT
operate other devices using the ITV POE. Do
NOT
use POE from other
devices to operate the ITV. By default, POE is
DISABLED
. Be sure that you
FULLY
understand this section
BEFORE
enabling POE on your ITV network.
12.2.
Configuring POE
POE is enabled or disabled using the “Enable POE” checkbox on the
network tab. Login to the ITV
and press the “Network” menu item.
The “Enable POE” check box is highlighted in the example
below.
Ethernet IP
Master Device
Data Links
24 VDC
