SMC Networks IDFC60 Series, Руководство по эксплуатации, Страница: 5 / 50

IDX-OM-U010
Chapter 1 Safety Instructions
IDFC60/70/80/90 Series 1.1 Before Using Air Dryer
1-1
Chapter 1 Safety Instructions
1.1 Before Using Air Dryer

In this chapter, the stated contents are especially about safety.

This Air Dryer is installed downstream of the air compressor to remove moisture. The manufacturer
is not responsible for any misuses or misapplications.

This Air Dryer operates with high voltage and hot surfaces during operation. In addition, this air
dryer has high speed rotating fan and motor, which can cause serious injury upon accidental contact.
It is advised that you contact the factory or SMC authorized dealer for spare parts or other servicing
needs.

We strongly recommend that any one who is working with this air dryer need to read and understand
the instructions in this manual beforehand.
Often, it’s necessary for the people involved, to receive
training in order to address the issues of safety and proper application.

When short period power shortage (including instantly recovered shortage) is recovered, it may take a
longer starting period than usual starting or may not start due to the protective devices.
In this case, turn off the Switch with lamp on dryer panel and wait 3 minutes. After this step, turn on
the switch to restart. When the cover panel of this unit is open, the Switch with lamp must be in the
off position, because dryer may start itself when the power supply is recovered.

Connections to a power source where the product is exposed to transient stresses exceeding
overvoltage category II (as defined in IEC60664-1).

Only connect to TN-S power distribution systems with N conductively connected to PE.

This manual must be kept available to operators whenever necessary.
1.1.1 Danger, Warning, and Caution Used in This Manual
This product is designed with the first priority on safety. However, there are some inherent risks that
cannot be eliminated. This manual classifies these risks into the following three categories according
to the severity: DANGER, WARNING and CAUTION. Read these statements carefully and thoroughly
understand them before operating or performing maintenance on the unit.
Be sure to read and comprehend important cautionary notifications in
this operation manual before use.
“DANGER” indicates that there is an imminent hazard that will cause serious injury
or death if not avoided.
DANGER
“WARNING” indicates that there is a hazard that may cause serious injury or death if
not avoided.
WARNING
“CAUTION” indicates that there is a hazard that may cause minor injury.
CAUTION