IDX-OM-U010
Chapter 2 Parts Name and Functions
IDFC60/70/80/90 Series
2.1
Parts Name and Functions
2-1
Chapter 2 Parts Name and Functions
2.1 Parts Name and Functions
Switch with Lamp
(ON / OFF Switch)
The lamp is continuously ON
during normal operation.
Ball Valve
Auto Drain
Check if drained correctly once a day.
Thermal Relay
(The thermal relay is placed at the
inside of a front panel.) Refer to page
6-4 to reset the thermal relay.
Ventilation Grille (Exhaust)
Hot air will be exhausted by
condenser fan. Do not block
these vents.
Refrigerant pressure gauge
Indicates the high pressure of
refrigerant.
During normal operation, the
indicator remains below red zone.
High Pressure Switch
(The high pressure switch is
placed at the inside of a front
panel.)
Refer to
page 6-4 to reset the
high pressure switch.
Power cable holder
Signal cable entry
Terminal block
You can see the terminal block when you remove
this cover. Connect the power cable through the
rubber grommet.
Customer connection side
Refer to page 3-6 for electrical wiring.
L
N PE
（
）
Compressed Air (OUT)
Compressed Air (IN)