SMC Networks HRZ002-W1S-F, Руководство по эксплуатации

Страница: 135 / 196

HRX-OM-X010
Chapter 5 System Operation
HRZ Series 5.3 Operation Screen
5-13
5-13
5.3.11 Control Setting screen 3-1
This screen is displayed if the PUMP IV is set to FREQ on the Initial Setting screen 3.
If PUMP IV is set to PRESS or FLOW, this screen will not be displayed and 5.3.9 Control Setting
screen 1 (page 5-11) will be displayed.
Figure 5-14 Control Setting screen3-1
Table 5-11 Control Setting screen3-1
No. Item Descriptions Setting Range Factory Default
1 TEMP SP
Allows the setting of circulating
fluid discharge temperature.
HRZ002-WS/W1S-F
：
-10.0 to 90.0 deg C
HRZ004/008/010-WS/W1S-F
：
-20.0 to 90.0 deg C
HRZ***-W2S-F :
10.0 to 60.0 deg C
HRZ008-L/L1-F :
-20.0 to 40.0 deg C
25.0 deg C
2 OFFSET
Allows the setting of OFFSET value
*
１
-20.0 to 20.0 deg C 0.0 deg C
3 PUMP SP
Switched to the “Control Setting screen
3-
2”.(Pump frequency setting screen.)
- -
[Tips]
In the case of using Offset Function, select any one of MODE 1 to 3 on No.3 of
“Initial Setting screen 1”. See ”Chapter 8 8.4Offset Function“ (page 8-14) for details
(*1).
[▲] or [▼] key is used for selecting “Item.” And pressing [ENT] key enabling to
change the set point of TEMP SP and OFFSET.
＜ＣＯＮＴＲＯＬ ＳＥＴ＞ ↕
ＴＥＭＰ ＳＰ ２５．０℃
ＯＦＦＳＥＴ ０．０℃
ＰＵＭＰ ＳＰ １５．０Ｈｚ 1
2
3
POWER ON