SMC Networks HRZ002-W1S-F, Руководство по эксплуатации

Страница: 182 / 196

HRX-OM-X010
Chapter 8 Appendix
8.1 Specification HRZ Series
8-10
8.1.4 Alarm signal selection
User can designate one alarm signal for contact signal. See section 5.3.22 Initial
Setting screen 7 “page 5-24” for signal selecting.
The following table presents the setting-alarm relationship. The alarm signal is
turned OFF if the designated alarm detected. (Alarm signal is ON if no alarm is
detected.)
Table 8-9 Alarm signal selection
Setting Alarm Alarm
N/A Alarm signal remains ON (closed) under normal circumstances. -
ALARM01 Water Leak Detect FLT 01
ALARM03 RFGT High Press FLT 03
ALARM04 CPRSR Overheat FLT 04
ALARM05 Reservoir Low Level FLT 05
ALARM06 Reservoir Low Level WRN 06
ALARM07 Reservoir High Level WRN 07
ALARM08 Temp. Fuse Cutout FLT 08
ALARM09 Reservoir High Temp. FLT 09
ALARM10 Return High Temp ･ WRN 10
ALARM11 Reservoir High Temp. WRN 11
ALARM12 Return Low Flow FLT 12
ALARM13 Return Low Flow WRN 13
ALARM19 FAN Motor Stop WRN 19
ALARM20 Internal Pump Time Out WRN 20
ALARM21 Controller Error FLT 21
ALARM22 Memory Data Error FLT 22
ALARM23 Communication Error 23
ALARM24
*1
DI Low Level WRN 24
ALARM25 Pump Inverter Error FLT 25
ALARM28
*2
CPRSR Inverter Error FLT 28
ALARM29 RFGT Low Press FLT 29
ALARM32 Reservoir Low Temp.WRN 32

Example
With parameter “OUT” on the Initial Setting screen set to “Alarm1”, alarm “Water Leak Detect FLT” is
detected, the alarm contact signal is switched to OFF (open).
*1 : Alarm 24 is alarm assigned to accessories (optional).
*2 : Alarm 28 is
not assigned for HRZ008-L*-F,
the alarm signal always remains ON (closed).