SMC Networks HRZ002-W1S-F, Руководство по эксплуатации

Страница: 141 / 196

HRX-OM-X010
Chapter 5 System Operation
HRZ Series 5.3 Operation Screen
5-19
5-19
5.3.17 Initial Setting screen 2
Figure 5-20 Initial Setting screen 2
Table 5-17 Initial Setting screen 2
No. Item Descriptions Setting Range Factory Default
1 REM.SD.WRITE
Store the TEMP SP and FLOW SP value
with serial communication. TEMP SP and
FLOW SP will be set to stored value after
re-turn ON the main breaker.
OFF,ON ON
2 REM.COM.ERR
Allows the selection of system condition
when serial communication error occurs
(WRN : Stop, FLT : Continued).
WRN,FLT WRN
3 DEVICE ADRS
*1
Allows the setting of the device address
for serial communication.
1 to 32CH 1
[Tips]
[▲] or [▼] key is used for selecting “Item” and move to other Initial Setting screens.
And pressing the [ENT] key enabling to select the setting.
*1 For HRZ010-W*S-F and HRZ008-L*-F,
’’SLAVE ADRS’’ is displayed.
＜ＩＮＩＴＩＡＬ ＳＥＴ＞ ↕
ＲＥＭ．ＳＤ．ＷＲＩＴＥ ＯＮ
ＲＥＭ．ＣＯＭ．ＥＲＲ ＷＲＮ
ＤＥＶＩＣＥ ＡＤＲＳ １ＣＨ
1
2
3
POWER ON