Peltier-Type Chiller
Thermo-con/Rack Mount Type
Series
HECR
1
Simple operation
Heat source
Temperature sensor
This function adjusts the fluid temperature
to the set value with an automatic offset
setting. Set the external temperature
sensor at the circulating fluid inlet located
just in front of the heat source, which
allows the Thermo-con to sample the fluid
temperature. This function is effective
when automatically adjusting for heat
exhaust from piping etc.
Less vibration and noise with no moving
parts such as a compressor.
Better space utilization with
reduced height and depth
compared to the current model
(HEC002).
If the external temperature sensor is installed directly on the heat source, the learning control
function may not work property due to large heat volume or large temperature difference. Be sure
to install the sensor at the circulating fluid inlet.
Circulating fluid volume can be checked.
q
Turn the power ON.
w
Press the
SEL
key, and adjust the temperature
setting with the
keys.
e
Press the
RET
key to complete.
Can precisely control the temperature of a heat source or process fluid.
Precisely control the temperature of the circulating fluid by using the Peltier device.
Refrigerant-free and environmentally friendly.
Air-cooled
Radiating method
Single-phase
100
to
240
VAC (Globally compatible power supplies)
Power supply
200
W
Cooling capacity
600
W
Heating capacity
Learning control function
(Temperature control by external temperature sensor)
Low vibration, Low noise (49 dBA)
Volume ratio reduced by 36%
Drain pan
Drain pan is equipped to avoid any
risk of fluid leakage over equipment
mounted in a lower rack.
Fluid fill port
Fluid can be supplied
without removing the
product from the rack.
Power switch
Rack mounting
bracket
Floor type is also available. (Option)
The rack mounting brackets and the handles can be removed and
rubber feet can be mounted instead. (Refer to page 11 for details.)
6.9
[176]
15.5
[393]
inch
[mm]
HEC002
HECR
11.8 [300]
17.1 [436]
19.0 [484]
8.3 [210]
