QuickServer Start-Up Guide
Page 30 of 34
Appendix B.5. Securing QuickServer with Password
Access to the FieldServer can be restricted by enabling a password on the FS-GUI Passwords page
–
click Setup and then Passwords in the navigation panel. There are 2 access levels defined by 2 account
names: Admin and User.
•
The Admin account has unrestricted access to the FieldServer.
•
The User account can view any FieldServer information but cannot make any changes or restart
the FieldServer.
The password needs to be a minimum of eight characters and is
case sensitive
.
If the password is lost, click cancel on the password authentication popup window, and e-mail the
password recovery token to
to receive a temporary password from the Sierra
Monitor support team. This will allow access to the FieldServer in order to set a new password.
Appendix B.6. Factory Reset Instructions
For instructions on how to reset a FieldServer back to its factory released state, see
ENOTE - FieldServer
Next Gen Recovery
.
Figure 16: FS-GUI Passwords Page
Figure 17: Password Recovery Page
