Con f igu rin g W in d ow s 2 0 0 0
1.
Access your Network settings by clicking
[ Start], choose [ Settings], and then
select [ Control P anel]
2.
In the Control P anel, locate and double-
click the [ Network and Dial-up
Connections] icon
3.
L ocate and double-click the [ L ocal Area
Connection] icon for the E thernet
adapter that is connected to the
G ateway. W hen the Status dialog box
window opens, click the [ P roperties]
button.
4.
O n the [ L ocal Area Connection]
P roperties box , verify the box nex t to
Internet P rotocol (TCP / IP ) is checked.
Then highlight the Internet P rotocol (TCP / IP ), and click the P roperties button.
5 .
Select O btain an IP address automatically to configure your computer for DH CP . Click
the [ O K ] button to save this change and close the P roperties window.
6 .
Click the [ O K ] button again to save these new changes.
7 .
R eboot your P C.
Con f igu rin g W in d ow s X P
The following instructions assume you are running W indows X P with the default interface. If
you are using the Classic interface (where the icons and menus look like previous W indows
versions), please follow the instructions for W indows 2000 outlined above.
1.
Access your Network settings by
clicking [ Start], choose [ Control
P anel], select [ Network and Internet
Connections] and then click on the
[ Network Connections] icon.
2.
L ocate and double-click the L ocal
Area Connection icon for the E thernet
adapter that is connected to the
W ireless Cable Modem G ateway. Nex t,
click the [ P roperties] button.
3.
O n the [ L ocal Area Connection]
P roperties box , verify the box nex t to
Internet P rotocol (TCP / IP ) is checked.
Then highlight the Internet P rotocol
(TCP / IP ), and click the P roperties
button.
4.
Select O btain an IP address automatically to configure your computer for DH CP . Click
the [ O K ] button to save this change and close the P roperties window.
5 .
Click the [ O K ] button again to save these new changes.
