SMC Networks EX510-DXB1, Руководство по эксплуатации

Страница: 14 / 64

-13-
No.EX##-OMI0032-C
EX510 GW unit
Summary of Product Parts
No. Element Description
1 Communication socket (BUS)
Connect to PROFIBUS DP line with a communication connector for
PROFIBUS DP (
). Connect a terminating resistor ( ) to both end units of
a transmission route.
2 Power supply socket (PWR(V))
Supplying power for output devices such as a solenoid valve with a power
supply connector (
).
3 Power supply socket (PWR)
Supplying power for controlling GW and for input devices such as a sensor
with a power supply connector (
).
4
GW unit side branch connector
(for input)
Connecting an Input unit etc. by using branch cables (EX510-FC ).
5
GW unit side branch connector
(for output) Connecting an SI unit (manifold valve) etc. by using branch cables
(EX510-FC
).
6 Ground terminal (FG) Used for grounding.
7 Mounting hole Used when an unit is mounted with two M4 screws.
8 DIN rail mounting slot Used when an unit is mounted to DIN rail.
9 Display/switch setting part Sets up the switch on such as LED display and address, I/O points.