9
D3G0804W User Manual
Connecting to the LAN
Using an Ethernet LAN cable, you can connect the Gateway to a desktop computer, notebook, hub, or
switch. The Gateway supports auto-MDI/MDIX, so you can use either a standard straight-through or
crossover Ethernet cable.
1. Connect either end of an Ethernet cable to one of the four LAN ports on the rear panel of the
Gateway (see Figure 3).
Figure 3. Connecting to a LAN Port on the Gateway Rear Panel<
2. Connect the other end of the cable to your computer’s network-interface card (NIC) or to another
network device (see Figure 4).
Figure 4. Connecting the Gateway to a Laptop or Desktop Computer