- 27 -
External stopper
When the kinetic energy where the load is generated exceeds a permissible kinetic energy of the actuator,
it is necessary to install the shock-absorbing mechanism outside and to absorb inertia force.
There is backlash of the gear because the CRA1 series is a single rack type. (It is within 1° at the rotation
end.) When there is no backlash, and an accurate positional precision is necessary, an external stopper
is needed.
Please use the product of 100° in swing angle and 190° respectively when 90° in swing angle and 180°
are set up in an external stopper and used.
Fig. (11) External stopper
2020-10-13 10:33
DI987004
