![background image](http://html.mh-extra.com/html/smc-networks/7003-usb/7003-usb_user-manual_1300040037.webp)
Setting Up TCP/IP
33
Verifying Your TCP/IP Connection
After installing the TCP/IP communication protocols and
configuring an IP address in the same network as the
Barricade™ Router, use the Ping command to check if your
computer has successfully connected to the Barricade™ Router.
The following example shows how the Ping procedure can be
executed in an MS-DOS window. First, execute the Ping
command:
ping 192.168.2.1
If a message similar to the following appears:
Pinging 192.168.2.1 with 32 bytes of data:
Reply from 192.168.2.1: bytes=32 time=2ms TTL=64
a communication link between your computer and the
Barricade™ Router has been successfully established.
If you get the following message,
Pinging 192.168.2.1 with 32 bytes of data:
Request timed out.
there may be something wrong in your installation procedure.
Check the following items in sequence:
1. Is the Ethernet cable correctly connected between the
Barricade™ Router and the computer?
2. The LAN LED on the Barricade™ Router and the Link LED of
the network card on your computer must be on.
3. Is TCP/IP properly configured on your computer?
If the IP address of the Barricade™ Router is 192.168.2.1,
the IP address of your PC must be from 192.168.2.2 -
192.168.2.254 and the default gateway must be 192.168.2.1.
If you can successfully Ping the Barricade™ Router you are now
ready to connect to the Internet.
Содержание 7003-USB
Страница 1: ...SMC7004ABR V 2 ...
Страница 2: ...BarricadeTM Broadband Router User Guide From SMC s Barricade line of Broadband Routers September 2003 ...
Страница 66: ...Advanced Setup 63 3 Click OK and then click the APPLY button to save your settings ...
Страница 109: ...Model Number SMC7004ABR V 2 ...