![background image](http://html.mh-extra.com/html/smc-networks/7003-usb/7003-usb_user-manual_1300040051.webp)
Configuring the Barricade™ Router
48
Dynamic IP
The Host Name is optional, but may be required by some ISPs.
The default MAC address is set to the WAN’s physical interface
on the Barricade™ Router. Use this address when registering for
Internet service, and do not change it unless required by your
ISP. If your ISP used the MAC address of an Ethernet card as an
identifier when first setting up your broadband account, only
connect the PC with the registered MAC address to the
Barricade™ Router and click the Clone MAC Address button.
This will replace the current Barricade™ Router MAC address
with the already registered Ethernet card MAC address.
If you are unsure of which PC was originally set up by the
broadband technician, call your ISP and request that they
register a new MAC address for your account. Register the
default MAC address of the Barricade™ Router.
Содержание 7003-USB
Страница 1: ...SMC7004ABR V 2 ...
Страница 2: ...BarricadeTM Broadband Router User Guide From SMC s Barricade line of Broadband Routers September 2003 ...
Страница 66: ...Advanced Setup 63 3 Click OK and then click the APPLY button to save your settings ...
Страница 109: ...Model Number SMC7004ABR V 2 ...