32
I
NSTALLING THE
SMC7003-PCI
WINDOWS MILLENNIUM
SETTING THE ADSL CONFIGURATION FOR RFC 1 483/1577/2364
1.
After your PC has rebooted, right-click on the
ADSL
utilities icon
and select the
Configuration
option.
2.
The
Configuration
window appears. This is the
Network
Protocol and PVC settings
section. Enter in the
VPI, VCI,
and Framing values
supplied by your ADSL service
provider.
3.
In the
Select ADSL Mode
section, select the mode(s) recommended by your ADSL service
provider. Click on the mode(s) required and then click on
Settings.
NOTE
: The service mode type will be one of the following:
ANSI T1.413 Issue 2
ITU G.992.2 Annex A (G.lite)
ITU G.992.1 Annex A (G.dmt)
4.
The
PVC Setup
window appears. Click
Yes
to restart your PC
system and to allow the new changes to take effect.
5.
You must now make an ADSL connection.
Proceed to the section for your protocol
.
RFC1483
Bridged Ethernet over ATM
ð
Go to page 3
RFC1577
Classical Internet Protocol over ATM
ð
Go to page 3
RFC2364
Point -to-Point Protocol over ATM
ð
Go to page 5
