31
I
NSTALLING THE
SMC7003-PCI
Windows MILLENNIUM
NOTE:
After installing the SMC7003-PCI, plug the power cable back into the PC system and turn the power on.
Insert the driver CD upon restart.
1.
The
Add New Hardware Wizard
window will
automatically appear to indicate that a new
PCI
Network Controller
has been found. Select the
Specify the location of the driver
option. Click
Next
.
2.
The
Install From Disk
window appears. Click the
scroll arrow to locate the driver on your CD -ROM
for the protocol supported by your ADSL provider:
1483wME, 2364wME,
or
1577wME
(The
example uses “E” as the CD -ROM drive letter.
Drive letters may vary.) Then click
O K
.
3.
At the conclusion of the driver installation, the
Add
New Hardware Wizard
window appears and
displays your newly installed
SMC ADSL PCI NIC
.
Click
Finish.
4.
The
System Setting Change
window appears. Click
Yes
to restart your PC system and to allow the new
changes to take effect.
5.
You must now set the ADSL configuration.
Go to page 32.
