36
I
NSTALLING THE
SMC7003-PCI
Editing Your Service Connection
Service Connection
1.
To view or edit the ADSL connection service address, right-click the
Diagnostic Tool
icon
(located on the
Taskbar), and select the
Configuration
option.
2.
The
PVC Setup
(Permanent Virtual Connection) window displays the connection service address. Click
Close
to exit window.
3.
To edit the
connection service address
, select and enter the VPI and VCI address in the field shown and click
PVC Setting
.
4.
To accept a
Connection Address
that has been changed (
restart
the PC System), click
Yes
.
NOTE:
A PC system restart will begin once the connection address change is accepted.
IP Configuration
1.
This section includes the IP configuration specifics for Windows NT4.0. The NT 4.0 windows are slightly
different from those of Windows 95 /98. Other than minor screen differences, the process for editing the IP
address settings is the same for Windows NT 4.0 and Windows 95/98.
2.
At your desktop, double- click
My Computer
, then double-click
Control Panel
to view the contents of the
control panel. In the
Control Panel
window, double-click the
Network
icon.
Note
: The Network window shortcut is a right-click on the
Network Neighborhood
icon on your desktop,
and then a left-click on
Properties
.
3.
Select the
Protocols
tab of the network window. Select
TCP/IP
Protocol and click
Properties
.
4.
Select the
IP address
option and note that the IP Address and Subnet Mask regions will turn from
gray
to
active
.
5.
Enter the IP Address (e.g. 192.168.4.39) and Subnet mask (e.g. 255.255.255.0).
6.
Enter the
Default Gateway
in this window, and then enter the
Host Name
and
Domain.
NOTE
: Please refer to your ADSL service provider.
To enter the Domain search (DNS) entries, click
Add,
then enter the address. Click
Add
to save the address. Repeat the process for additional DNS entries.
Click
O K
to update the changes.
