manualshive.com logo in svg

SMC Networks 6152L2, Руководство по управлению

Поделиться
Скачать
SMC Networks 6152L2 Скачать руководство пользователя страница 422

C

OMMAND

 L

INE

 I

NTERFACE

4-132

2.

Allow the switch to send SNMP traps; i.e., notifications 
(page 4-133).

3.

Specify the target host that will receive inform messages with the 

snmp-server host

 command as described in this section.

4.

Create a view with the required notification messages (page 4-136).

5.

Create a group that includes the required notify view (page 4-138).

To send an inform to a SNMPv3 host, complete these steps:

1.

Enable the SNMP agent (page 4-125).

2.

Allow the switch to send SNMP traps; i.e., notifications 
(page 4-133).

3.

Specify the target host that will receive inform messages with the 

snmp-server host

 command as described in this section.

4.

Create a view with the required notification messages (page 4-136).

5.

Create a group that includes the required notify view (page 4-138).

6.

Specify a remote engine ID where the user resides (page 4-134).

7.

Then configure a remote user (page 4-141).

• The switch can send SNMP version 1, 2c, or 3 notifications to a host 

IP address, depending on the SNMP version that the management 
station supports. If the 

snmp-server host

 command does not specify 

the SNMP version, the default is to send SNMP version 1 
notifications.

• If you specify an SNMP Version 3 host, then the community string is 

interpreted as an SNMP user name. If you use the V3 “auth” or “priv” 
options, the user name must first be defined with the 

snmp-server 

user

 command. Otherwise, the authentication password and/or 

privacy password will not exist, and the switch will not authorize 
SNMP access for the host. However, if you specify a V3 host with the 
“noauth” option, an SNMP user account will be generated, and the 
switch will authorize SNMP access for the host.

Содержание 6152L2







































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды