manualshive.com logo in svg

SMC Networks 6152L2, Руководство по управлению

Поделиться
Скачать
SMC Networks 6152L2 Скачать руководство пользователя страница 136

C

ONFIGURING

 

THE

 S

WITCH

3-90

The operation of 802.1x on the switch requires the following:
•

The switch must have an IP address assigned.

•

RADIUS authentication must be enabled on the switch and the IP 
address of the RADIUS server specified.

•

Each switch port that will be used must be set to dot1x “Auto” mode.

•

Each client that needs to be authenticated must have dot1x client 
software installed and properly configured.

•

The RADIUS server and 802.1x client support EAP. (The switch only 
supports EAPOL in order to pass the EAP packets from the server to 
the client.)

•

The RADIUS server and client also have to support the same EAP 
authentication type. The current version of the firmware supports only 
the EAP-MD5 authetication type. (Some clients have native support in 
Windows, otherwise the dot1x client must support it.)

Displaying 802.1x Global Settings

The 802.1x protocol provides client authentication.

Command Attributes 

•

802.1x System Authentication Control 

– The global setting for 

802.1x. 

Web 

– Click Security, 802.1x, Information.

Figure 3-39.  802.1x Global Information

Содержание 6152L2







































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды