manualshive.com logo in svg

SMC Networks 6152L2, Руководство по управлению

Поделиться
Скачать
SMC Networks 6152L2 Скачать руководство пользователя страница 277

DHCP S

NOOPING

3-231

When the DHCP Snooping Information Option is enabled, clients can be 
identified by the switch port to which they are connected rather than just 
their MAC address. DHCP client-server exchange messages are then 
forwarded directly between the server and client without having to flood 
them to the entire VLAN.

In some cases, the switch may receive DHCP packets from a client that 
already includes DHCP Option 82 information. The switch can be 
configured to set the action policy for these packets. Either the switch can 
discard the Option 82 information, keep the existing information, or 
replace it with the switch’s relay information.

Note:

DHCP snooping must be enabled on the switch for the DHCP 
Option 82 information to be inserted into packets.

Command Attributes

•

DHCP Snooping Information Option Status

 – Enables or disables 

DHCP Option 82 information relay.

•

DHCP Snooping Information Option Policy

 – Sets the DHCP 

snooping information option policy for DHCP client packets that 
include Option 82 information.
-  

Replace

 – Overwrites the DHCP client packet information with the 

switch’s relay information.

-  

Keep

 – Retains the client’s DHCP information.

-  

Drop

 – Discards the Option 82 information in a packet and then 

floods it to the entire VLAN.

Содержание 6152L2







































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды