SMC Networks 6152L2 Скачать руководство пользователя страница 397

Страница: 397 / 582

UTHENTICATION

OMMANDS

4-107

Default

force-authorized

Command Mode

Interface Configuration

Example

dot1x operation-mode

This command allows single or multiple hosts (clients) to connect to an
802.1X-authorized port. Use the

form with no keywords to restore the

default to single host. Use the

form with the

multi-host max-count

keywords to restore the default maximum count.

Syntax

dot1x operation-mode

{

single-host

multi-host

[

max-count

count

]}

no dot1x operation-mode

[

multi-host max-count

]

•

single-host

– Allows only a single host to connect to this port.

•

multi-host

– Allows multiple host to connect to this port.

•

max-count

– Keyword for the maximum number of hosts.

count

– The maximum number of hosts that can connect to a port.

(Range: 1-1024; Default: 5)

Default

Single-host

Command Mode

Interface Configuration

Command Usage

• The “max-count” parameter specified by this command is only

effective if the dot1x mode is set to “auto” by the dot1x port-control
command (page 4-105).

• In “multi-host” mode, only one host connected to a port needs to pass

authentication for all other hosts to be granted network access.

Console(config)#interface eth 1/2
Console(config-if)#dot1x port-control auto
Console(config-if)#

Содержание 6152L2







































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 6152L2

Отзывы:

Бренды по названию

Популярные бренды

SMC Networks 6152L2, Руководство по управлению

Результаты поиска

Содержание 6152L2

Отзывы:

Бренды по названию

Популярные бренды