SMC Networks 6128PL2, Руководство по управлению

Страница: 65 / 664

Basic Configuration
3-13
3
CLI – Specify the hostname, location and contact information.
Displaying Switch Hardware/Software Versions
Use the Switch Information page to display hardware/firmware version numbers for
the main board and management software, as well as the power status of the system.
Field Attributes
Main Board
• Serial Number – The serial number of the switch.
• Number of Ports – Number of built-in RJ-45 ports.
• Hardware Version – Hardware version of the main board.
• Internal Power Status – Displays the status of the internal power supply.
Management Software
• EPLD Version – Version number of the Electronically Programmable Logic Device
code.
• Loader Version – Version number of loader code.
• Boot-ROM Version – Version of Power-On Self-Test (POST) and boot code.
• Operation Code Version – Version number of runtime code.
• Role – Shows that this switch is operating as Master or Slave.
Console(config)#hostname R&D 5 4-26
Console(config)#snmp-server location WC 9 4-153
Console(config)#snmp-server contact Ted 4-152
Console(config)#exit
Console#show system
4-81
System description : 24 10/100 ports and 4 gigabit ports with PoE
System OID string : 1.3.6.1.4.1.202.20.65
System information
System Up time : 0 days, 0 hours, 14 minutes, and 32.93 seconds
System Name : R&D 5
System Location : WC 9
System Contact : Ted
MAC address : 00-00-35-28-10-03
Web server : enabled
Web server port : 80
Web secure server : enabled
Web secure server port : 443
Telnet server : enable
Telnet port : 23
Jumbo Frame : Disabled
POST result
UART Loopback Test ........... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
PCI Device 1 Test ............ PASS
I2C Bus Initialization ....... PASS
Switch Int Loopback Test ..... PASS
Fan Speed Test ............... PASS
Done All Pass.
Console#