Command Line Interface
4-108
4
Command Mode
Global Configuration
Command Usage
• This command performs authorization to determine if a user is allowed to run
an Exec shell.
• AAA authentication must be enabled before authorization is enabled.
• If this command is issued without a specified named method, the default
method list is applied to all interfaces or lines (where this authorization type
applies), except those that have a named method explicitly defined.
Example
authorization exec
This command applies an authorization method to local console or Telnet
connections. Use the
no
form to disable authorization on the line.
Syntax
authorization exec
{
default
|
list-name
}
no authorization exec
•
default
- Specifies the default method list created with the
aaa
authorization exec
command (page 4-107).
•
list-name -
Specifies a method list created with the
aaa authorization exec
command.
Default Setting
None
Command Mode
Line Configuration
Example
Console(config)#aaa authorization exec default group
Console(config)#
Console(config)#line console
Console(config-line)#authorization exec tps
Console(config-line)#exit
Console(config)#line vty
Console(config-line)#authorization exec default
Console(config-line)#
Содержание 6128PL2
