SMC Networks 6128PL2, Руководство по управлению

Страница: 345 / 664

System Management Commands
4-37
4
User Access Commands
The basic commands required for management access are listed in this section.
This switch also includes other options for password checking via the console or a
Telnet connection (page 4-10), user authentication via a remote authentication
server (page 4-90), and host access authentication for specific ports (page 4-112).
username
This command adds named users, requires authentication at login, specifies or
changes a user's password (or specify that no password is required), or specifies or
changes a user's access level. Use the
no form to remove a user name.
Syntax
username name { access-level level | nopassword |
password { 0 | 7 } password }
no username name
• name - The name of the user.
(Maximum length: 8 characters, case sensitive. Maximum users: 16)
• access-level level - Specifies the user level.
The device has two predefined privilege levels:
0 : Normal Exec, 15 : Privileged Exec.
• nopassword - No password is required for this user to log in.
• { 0 | 7 } - 0 means plain password, 7 means encrypted password.
• password password - The authentication password for the user.
(Maximum length: 8 characters plain text, 32 encrypted, case sensitive)
Default Setting
• The default access level is Normal Exec.
• The factory defaults for the user names and passwords are:
Command Mode
Global Configuration
Table 4-10 User Access Commands
Command Function Mode Page
username Establishes a user name-based authentication system at login GC 4-37
enable password Sets a password to control access to the Privileged Exec level GC 4-38
Table 4-11 Default Login Settings
username access-level password
guest
admin 0
15 guest
admin