5
SVC400P/SVC800P - Installation Manual
4. PACKAGE CONTENTS
Please ensure that the SVC400P/SCV800P’s box includes the following items:
MDVR’s Recording Module and Mounting Assembly
Video Input/ AV output cable
Power cable
USB Cable
Screws for installing the unit
A set of keys for locking and/or unlocking the HDD case and a fuse
Handheld IR remote control (batteries not included)
Installation bracket
Accessories available for the SVC400P/SCV800P include the following:
Alarm Input Box
(SVA400A)
GPS Module and Antenna
(SVA400G)
3G Module
(SVA400T)
Wifi Module
(SVA480W)
Din Plug to BNC Socket Adapter
(SVA480C)
Locking Box
(SVA400L)
5. MOUNTING AND ENVIRONMENTAL REQUIREMENTS
To ensure the MDVR operates efficiently and within the product warranty compliance, please adhere to all following installation
instructions:
Power
: It is recommended that the MDVR be connected to the vehicle ignition. Battery power is used only when the
vehicle is running. The MDVR could drain any vehicle battery over time if the ignition is not turned off.
Connection
: Connect only to appropriate power supply and ensure proper grounding of the circuit.
Moisture
: Protect unit and connections from environmental sources of moisture and liquid spills.
Temp
: Do not install where unit temperature will exceed F140°F (60°C), fall below -20°F (-28°C) or store the unit where
temperatures rise above 175°F (80°C). Avoid direct exposure to sunlight.
Ventilation
: Provide sufficient ventilation with a minimum of 6 inches cooling clearance to ensure proper operating
temperature for the unit.
Vibration
: If necessary, provide additional shock mounting to prevent damage and wear by excessive vibration.
Clearance
: Front clearance of 8 inch is required to slide the recording module from the mounting assembly.
Wiring
: Install where mounting assembly wires have sufficient clearance and will not be crimped or subject to wire
insulation damages due to vibration.
Access
: Secure the MDVR so that passengers or drivers cannot tamper or damage the unit, cameras, wires or other
accessories. Do not mount where access to any other vehicle component will be restricted.
Injury
: Install the unit, cameras, accessories and wires so that no injuries can be caused through impact with
equipment during vehicle operation. Ensure that all transportation regulations are followed to avoid passenger injury
should they come in contact with the installed equipment.
6. INSTALLATION TOOLS
Please ensure that you have the following tools available prior to commencing an installation:
Drill and bids
Screws/bolts and vibration dampening washers as appropriate for mounting
Wire cutters and wire connectors
Test for voltage and electric current
