www.smartwitness.com
43
Excess RPM Duration Ratio
This option sets the grading criteria for excessive RPM over the RPM limit.
This value is estimated as a percentage of the amount of time driving. For
example, if a driver drove 8 hours in a day but was exceeding the RPM limit
for 1 hour, their score for this criteria would be 12.5% and based on the
image on page 39, they would be graded as A.
The assessment of this criteria is based on the RPM limit option in the
‘Analysis Criteria Setting’. This criteria is used for eco grading only.
Idling Count
This option sets the grading criteria for idling and is calculated per hour. For
example, if a driver drove 8 hours in a day but exceeded the idle time limit
4 times, their score for this criteria would be 0.5 and based on the image on
page 39, they would be graded as B.
The assessment of this criteria is based on the RPM limit option in the
‘Analysis Criteria Setting’. This criteria is used for eco grading only.
Once the grading criteria settings has been adjusted and saved, it can be
exported into an ‘ini’ file and then imported into another version of the
analysis software.
This means that you can set each SVC1080-LCA quicker than manually
adjusting the settings in each version of the software.
PLEASE NOTE
GRADING METHOD
