www.smartwitness.com
38
ANALYSIS CRITERIA SETTINGS
This option allows you to adjust the change the analysis criteria settings. To
access this menu, go to ‘settings’, click ‘analysis criteria settings’ and you will
be presented with the following screen.
Acceleration/Deceleration
This sets the criteria for excessive acceleration and deceleration. This is
measured in G-force, so if acceleration or deceleration exceeds the G-force
limit, it will be counted as excessive.
Speed Limit
This option allows you to set the criteria for excessive speeding. You can
set the value limits between 0-999km/h. In the example above, the limit has
been set to 80km/h for 30 seconds, so therefore if the vehicle goes over
this speed for over 30 seconds, it will count as excessive speeding. If you
go over that speed but for under 30 seconds, it will not count as excessive
speeding.
RPM Limit
Set the limit for excessive RPM. The RPM limit can be set from 0-9999 RPM
and the time can be set by selecting the drop down menu. In the example
above the limit has been set to 2400 RPM for 30 seconds. If this limit is
exceeded, it will count as excessive.