www.smartwitness.com
13
Parking Mode
The parking mode function allows you to record data when your vehicle is
parked. If the G-sensor value changes are less than 50mg for 5 minutes, the
recording frame rate will drop to 1fps.
When the vehicle stars to move again, the parking mode will switch off
automatically and starts continuous recording immediately.
G-Sensor Calibration
To begin the G-sensor calibration, follow the steps below;
1. Install the unit and park the vehicle on a flat surface.
2. Turn on the unit and press the blue button once.
3. Then the calibration can begin when the buzzer beeps.
For this function, please check the G-sensor and calibration functions using
the settings on the software.
Built-in Power Backup (Super Capacitor)
In the event of the power failing on the unit, the SVC1080-LCA will remain on
to create the last data file using the internal super capacitor.
Time and Date
The SVC1080-LCA gets the time and date information from the GPS
satellites, so there is no need to set this manually. However, you can set this
using the SVC1080-LCA software.
