SmartWitness CP4, Руководство по установке

Страница: 8 / 15

pg. 8

If a WiFi or LTE modem antenna is required, make sure to connect it to the blue USB1 input on
the rear side of the CP4 with the provided cable.

Run camera cable(s) and secure in headliner or other area so no cables are exposed. Use
provided wire clips if necessary.

Connect all cables to CP4 Recorder. Secure the windshield mounted camera cables into the
headliner and down the A-Pillar.

Route the GPS cable and LTE Antenna cable (if applicable) up the side panel and on the
dashboard
, in view of the windshield (so it can have a view of the sky to acquire GPS signal).
o
Activate the product in an area without large buildings to improve GPS reception.
o
The temperature ranges for optimum operation of the GPS receiver in your car is -10 ~ 50°C.

Camera Types
o
CP4 has various camera models offered which should be installed in the
appropriate location. Here is a reference guide for the common models.
Model # Picture Installation Location Notes
SVA032-A
Road facing on
Windshield
IP68 Weatherproof
rated. L bracket
included for various
mounting options.