Smartwatch H20SWDVR16 Скачать руководство пользователя страница 34

Страница: 34 / 181

SmartWatch DVR Operation Manual

3.3 Adjusting Live View Settings

Purpose:

Live View settings can be customized according to different needs. You can configure the output interface, the

dwell time for auto-switching, audio on/off etc.

Steps:

Enter the Live View Settings interface.

Menu> Configuration> Live View

Figure 3.7 Live View-General

The settings available in this menu include:

•

Video Output Interface:

Select the output to configure settings for. Two output interfaces are

selectable: VGA/HDMI and Main CVBS.

•

Live View Mode:

Select different window-division modes from the drop-down list.

•

Dwell Time:

The time in seconds to

dwell

between switching of channels when enabling auto-

switch in Live View.

•

Enable Audio Output:

Enable/disable audio output for the selected video output.



When the VGA/HDMI output interface is used as the main video output and the

Audio

Output

for the VGA/HDMI output interface is enabled, the VGA/HDMI audio and

AUDIO OUT can be used for live view, playback and two-way audio.



When the VGA/HDMI output is used as the main video output and the

Audio Output

for

the VGA/HDMI output interface is disabled, the VGA/HDMI output provides no audio

and the AUDIO OUT is used for two-way audio.



When the CVBS output is used as the main video output, the VGA/HDMI audio is

provided for Aux video output in live view, and the AUDIO OUT is used as the main

video output(for live view, playback or two-way audio).

•

Event Output:

Select the output to show event video.

•

Full Screen Monitoring Dwell Time:

The time in seconds to show alarm the event screen.

Setting Camera Order

Содержание H20SWDVR16






















































































































































































Результаты поиска

Содержание H20SWDVR16

Отзывы:

Smartwatch H20SWDVR16, Руководство по эксплуатации, Страница: 34 / 181

Результаты поиска

Содержание H20SWDVR16

Отзывы: