Smartwatch H20SWDVR16, Руководство по эксплуатации, Страница: 16 / 181

SmartWatch DVR Operation Manual
15
No. Name Description
6 REC Button Entering the Manual Record settings menu.
In PTZ control settings, press the REC button and then you can call a
PTZ preset by pressing Numeric button.
7
PLAY Button
Entering the All-day Playback menu.
8 INFO Button -
9 VOIP/MON Button
Selecting all items on the list;
In live view or playback mode, it can be used to switch between main
and auxiliary video output.
10 MENU Button Back to the Main menu (after successful login).
11
PREV Button Switching between single screen and multi-screen mode.
12
DIRECTION/ENTER
Buttons
Navigating between different fields and items in menus.
In Playback mode, the Up and Down buttons are used to speed up and
slow down the playing of recorded video. The Left and Right buttons
will skip 30s forward or backwards in playback.
In live view mode, these buttons can be used to cycle through
channels.
13 PTZ Button Enter the PTZ Control mode.
14 ESC Button Back to the previous menu
Pressing for arming/disarming the DVR in Live View mode.
15 RESERVED -
16 F1 Button Selecting all items on the list when used in a list field.
In PTZ Control mode, it will turn on/off PTZ light.
17
PTZ Control Buttons
Adjusting the iris, focus and zoom of a PTZ camera.
18 F2 Button Cycle through tab pages.
Troubleshooting Remote Control:
Make sure you have installed batteries properly in the remote control and you are aiming the remote control
at the IR receiver on the front panel. If there is no response after you press any button on the remote, follow the
procedure below to troubleshoot.
Steps:
1. Go to Menu > Configuration > General > More Settings using the mouse.
2. Check and remember the device No. The default No. is 255. This device No. is valid for all the IR
remote controls.
3. Press the DEV button on the remote control.
4. Enter the device No. from step 2.
5. Press the ENTER button on the remote.
If there is still no response from the remote, please check the following:
1. Batteries are installed correctly and the polarities of the batteries are not reversed.
2. Batteries are fresh and not out of charge.
3. IR receiver is not obstructed.
If there is still no response from the remote please contact your device provider.