Smartwatch H20SWDVR16, Руководство по эксплуатации, Страница: 167 / 181

SmartWatch DVR Operation Manual
166
13.1 Configuring General Settings
Purpose:
You can configure the BNC output standard, VGA/HDMI output resolution, mouse pointer speed, etc.
Steps:
1. Enter the General Settings interface.
Menu > Configuration > General
2. Select the General tab.
Figure 13.1 General Settings Interface
3. Configure the following settings:
•
Language: The default language used is English .
•
CVBS Output Standard: Select the CVBS output standard to NTSC or PAL, which must be
the same as the video input standard.
•
Resolution: Select the VGA/HDMI output resolution, which must be the same as the
resolution of the monitor screen.
•
Time Zone: Select the time zone.
•
Date Format: Set the date format.
•
System Date: Select the system date.
•
System Time: Set the system time.
•
Mouse Pointer Speed: Set the speed of mouse pointer; 4 levels are configurable.
•
Enable Wizard: Enable/disable the Wizard when the device starts up.
•
Enable ID Authentication: Enable/disable the use of the login password.
4. Click the Apply button to save the settings.
13.2 Configuring RS-232 Serial Port
The RS-232 serial port is available only on the H20SWDVR16R and H20SWDVR32R.
Purpose:
The RS-232 port can be used in two ways:
•
Parameters Configuration: Connect a PC to the device through the PC serial port. Device parameters can be
configured by using software such as HyperTerminal. The serial port parameters must be the same as the
device’s when connecting with the PC serial port.