Smartwatch H20SWDVR16, Руководство по эксплуатации, Страница: 154 / 181

SmartWatch DVR Operation Manual
153
Please refer to step 7 of Chapter 11.1 Configuring OSD Settings .
7. Click the Apply button to save the settings.
You can also click the Restore button to restore the current OSD settings to the default parameters.
11.3 Configuring Video Parameters
Steps:
1. Enter the Image Settings interface.
Menu > Camera > Image
2. Select the camera to set image parameters.
3. Set the time period in which the parameters will apply. Two time periods can be configured e.g. day
& night. When Period 1 has been configured, Period 2 is referred to as Other Time .
Figure 11.5 Image Settings Interface
4. Select the mode from the drop-down menu that relates to the prevalent light conditions during the
time period.
Four modes are selectable:

Standard : in general lighting conditions (default).

Indoor: the image is relatively smoother.

Dim Light: the image is smoother than the other three modes.

Outdoor: the image is relatively clearer and sharper. The degree of contrast and saturation is high.
5. Adjust the image parameters including the brightness, contrast, saturation, hue, sharpness and denoising
level by moving the sliding bar or increasing/decreasing the value.
Different modes have different default parameters. You can also adjust the value of the brightness,
contrast, saturation and hue in the range of 0~ 255, the sharpness in the range of 0~ 15 and the denoising
level in the range of 0~ 5.
6. You can click the Copy button to copy the image settings of the current camera to other cameras. Please
refer to step 7 of Chapter 11.1 Configuring OSD Settings .
7. On the Image Settings interface, click the Apply button to save the settings.
you can click the Restore button to restore the current image settings to default parameters.