SmartStore SS1510, Руководство по сборке

Страница: 12 / 15

ROOF ASSEMBLY
STEP 2:

Position the Roof Sheets with the back lining up with the outside edge
of the back wall cladding, as in
fig. 2 .

Using 4 x 40mm weatherseals, nail the Roof Sheets to the Top Plates
at each corner, ensuring ribs on the Roof Sheets line up with ribs on
the Wall Sheets (
fig.3 ).
11
fig.3
STEP 4:

Place the Ridge Flashing in position ensuring flashing does not extend
past side wall cladding.

Rivet Ridge Flashing to roof and back wall, riveting at the ends and at
each join of the roof sheets (
fig. 2 ).
fig.4
X 4
X 4
Barge
STEP 1:

Ensure Shed is sitting level and square.

Lay Roof Sheets on the Top Plates (with slots at front).

Rivet sheets together at overlaps with 2 x rivets per join ( fig. 1) .
STEP 3:

Ensure the Front and Back Top Plates are straight. Nail the roof sheets
to the front & back Top Plates, using 1 x nail per pan (
fig.3 ).
IMPORTANT—FOR SHEDS WITH OPTIONAL CLEAR
ROOF PANEL
Assemble as below, making sure that the Clear Roof Sheets
overlap the standard roof sheets on both sides.
The Clear Roof Panel must be secured to the front and back
Top Plates. Pre drill and fasten with the 40mm weatherseal
nails provided.
.
SELECT:
3 x 1.110 Roof Sheets
1 x 1.550 Spouting
2 x 1.110 Barges
1 x 1.550 Ridge Flashing
20 x 40mm Weatherseal Nails
30 x Rivets
fig. 2
X 4
X 4
RIDGE
FLASHING
ROOF
SHEET
BACK WALL
SHEET
SIDE
WALL
FRONT WALL
BACK WALL
SIDE
WALL
BOTTOM PLATE
TOP PLATE
fig.1
STEP 5:

Place barge flashings on roof at end of shed ensuring the diagonal
trimmed end is at the front.

Rivet the Barge Flashings to the roof and the side wall, using four rivets
on top of barge and four into the side (
fig.4 ).
STEP 6:

Place spouting in position and rivet to Barge Flashings at each end and
rivet to roof sheets (1 rivet per 1 sheet).