Page 84
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
The individual fields on this screen are defined as follows:
Field Name
Description
Enable WPS
[Enabled, Disabled] Enables Wi-Fi Protected Setup.
Enter STA PIN
Use AP PIN
Select the method [STA PIN, AP PIN] for how the WPS PIN is generated. Select the
desired radio button then click the “Add Enrollee” if necessary to add a specific, en-
rollee station.
If both the PIN field and Set Authorized Station MAC are left blank, the PBC (push-
button) mode is automatically made active.
Set Authorized Station MAC
When manually pairing via WPS, enter the MAC address of the client device you are
trying to connect.
Set WPS AP Mode
[Configured, Unconfigured] Select Configured to have the gateway assign security
settings to clients. Select Unconfigured when you wish to have an external client as-
sign security settings to your SmartRG gateway.
Device PIN
(Auto generated by the access point.)
Network Authentication
Select the desired network security authentication type.
Note that many of the fields in the Manual Setup portion of the screen vary based on the choice of Network Authentication.
Each variation is presented below.
