Page 55
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
Field Name
Description
Classification Name
A free form text field. Enter a descriptive name for this rule.
Rule Order
[Last, Null] Select
Last
to set this rule as the very last classification rule to be processed.
Select
Null
to set this rule as the next classification rule to be processed within the exist-
ing list of classification rules.
Rule Status
[Enable, Disable] Select whether this rule is active or turned off.
Class Interface
[local, eth0..eth4, wl0] Select an interface.
Ether Type
[IP, ARP, IPV6] Select the Ethernet interface type for this classification.
Source MAC Address
Source MAC Mask
Enter the source MAC Address and Source MAC Mask applied to classification.
Destination MAC Address
Destination MAC Mask
Enter the destination MAC Address and destination MAC Mask applied to classification.
Source IP Address/Mask
Enter the source IP Address and Source IP Mask applied to classification.
Destination IP Address /Mask
Enter the source IP Address and Source IP Mask applied to classification.
Protocol
(Optional) Enter the Protocol specified for classification criteria.
UDP/TCP Source Port
(Optional) Enter the Source Port applicable for classification criteria. Expressed as a range
or single port. (port:port or port).
UDP/TCP Destination Port
(Optional) Enter the Destination Port applicable for classification criteria. Expressed as a
range or single port. (port:port or port).
Specify Class Queue
Choose from available queues in the drop-down list.
Packets classified into a queue that exit through an interface for which a queue is not
specified to exist, will instead egress to the default queue on the interface.
Mark Applied Differentiated Service
Code Point
Select the desired DSCP code from the drop down list.
802.1P priority
[1-7] (Lower values have higher priority.) This value is inserted into the Ethernet frame to
be used by QoS disciplines to differentiate traffic.
Rate Limit (kbps)
Data traffic rate limit applied to classification.
The individual fields on this screen are defined as follows:
