Page 50
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
Note that there is only one
Block List
and one
Allow List
per gateway. The stand-alone modem capability does not maintain a
unique Allow and Block List for each individual LAN device. Some additional flexibility however is available when your SmartRG
gateway is under management of Cisco Prime Home™. Refer to Cisco documentation regarding, “Content Filtering” for instruc-
tions.
The individual fields on this screen are defined as follows:
Field Name
Description
URL Address
URL address to be added to the enabled applicable Exclude or Include list.
Port Number
Port number associated with URL being added (default 80 ).
Quality of Service
QOS enables prioritization of internet content to help ensure the best possible performance. This is particularly useful for stream-
ing video and audio content to minimized potential for drop-outs. QoS becomes significant when the sum of the traffic (audio,
video, data) exceeds the capacity of the line.
QoS Config
Use the QOS Config screen to enable QOS and set the
DSCP Mark classification.
Note:
- In ATM mode, the maximum queues that can be configured is 16.
- In PTM mode, the maximum queues that can be configured is 8.
- For each Ethernet interface, the maximum configurable queues is 4.
- Queues for Wireless (e.g. WMM Voice Priority for wl0 interface) show only when wireless is enabled. If the WMM
Advertise function in the Wireless Basic Setup page is disabled, classification related to wireless will have no effect.
After selecting
Advanced Setup -> Quality Of Service -> QoS Config
, click the
checkbox
toward the center of the screen if you wish
to enable QoS.
