background image

9

TROUBLESHOOTING GUIDE

If your cleaner is still not performing properly after all of the troubleshooting has been performed  please contact SmartPool, Inc. Technical Service at 1-732-730-9880.

ERROR

REASON(S)

SUGGESTION(S)

PUMP AND DRIVE
MOTORS NOT
OPERATING

AC OUTLET/GFI

CHECK AC OUTLET/RESET THE GFI OR TRY ANOTHER OUTLET

POWER SUPPLY RESET

TURN THE POWER SUPPLY OFF AND UNPLUG THE POWER SUPPLY FROM THE AC OUTLET.  WAIT 30 SECONDS AND TURN
POWER SUPPLY ON.

EXTENSION CORD

TRY PLUGGING THE POWER SUPPLY DIRECTLY INTO AN OUTLET

LOOSE SWIVEL CONNECTION

ENSURE ALL CONNECTIONS TO/FROM THE SWIVEL ARE SECURE.

NOT MOVING

BRUSHES WORN

CHECK BRUSHES AND REPLACE IF NECESSARY

DEBRIS CAUGHT IN TRACKS/BRUSHES/IMPELLER

CHECK FOR DEBRIS AND CLEAN WITH A GARDEN HOSE/MAY HAVE TO REMOVE IMPELLER CAP (1 SCREW)

CLEANER CAUGHT ON OBSTRUCTION IN POOL

TURN THE CLEANER OFF AND GENTLY PULL ON THE CORD TO REMOVE IT FROM OBSTRUCTION

FILTER BAG INSTALLATION

RUN THE CLEANER WITHOUT THE FILTER BAG AND CHECK THE BOTTOM LID/FILTER BAG FOR PROPER INSTALLATION

TRACKS FALLEN OFF

CHECK TO SEE IF THE TRACKS ARE LOOSE OR HAVE FALLEN OFF COMPLETELY

NO SUCTION

FILTER BAG INSTALLATION

RUN THE CLEANER WITHOUT THE FILTER BAG AND CHECK THE BOTTOM LID/FILTER BAG FOR PROPER INSTALLATION

FILTER BAG FULL

CLEAN THE FILTER BAG THROUGHLY WITH A GARDEN HOSE

DEBRIS IN FAN/IMPELLER

CHECK FOR DEBRIS AND CLEAN WITH A GARDEN HOSE/MAY HAVE TO REMOVE IMPELLER CAP (1 SCREW)

STARTS AND STOPS

FILTER BAG INSTALLATION

RUN THE CLEANER WITHOUT THE FILTER BAG AND CHECK THE BOTTOM LID/FILTER BAG FOR PROPER INSTALLATION

FILTER BAG FULL

CLEAN THE FILTER BAG THROUGHLY WITH A GARDEN HOSE

DEBRIS CAUGHT IN TRACKS/BRUSHES/IMPELLER

CHECK FOR DEBRIS AND CLEAN WITH A GARDEN HOSE/MAY HAVE TO REMOVE IMPELLER CAP (1 SCREW)

BRUSHES WORN

CHECK THE BRUSHES AND RING (IF APPLICABLE) FOR WEAR/HOLES WHICH WILL INHIBIT THE CLEANER'S PERFORMANCE

CAUGHT ON SOMETHING IN POOL

TURN THE CLEANER OFF AND GENTLY PULL ON THE CORD TO REMOVE IT FROM OBSTRUCTION

LOOSE SWIVEL CONNECTION

ENSURE ALL CONNECTIONS TO/FROM THE SWIVEL ARE SECURE.

BACK &
FORTH/DOING
WHEELIES OR
SPINNING IN CIRCLES

FILTER BAG INSTALLATION

RUN THE CLEANER WITHOUT THE FILTER BAG AND CHECK THE BOTTOM LID/FILTER BAG FOR PROPER INSTALLATION

DEBRIS CAUGHT IN TRACKS/BRUSHES/IMPELLER

CHECK FOR DEBRIS AND CLEAN WITH A GARDEN HOSE/MAY HAVE TO REMOVE IMPELLER CAP (1 SCREW)

CLEANER CAUGHT ON OBSTRUCTION IN POOL

TURN THE CLEANER OFF AND GENTLY PULL ON THE CORD TO REMOVE IT FROM OBSTRUCTION

TRACKS FALLEN OFF

CHECK TO SEE IF THE TRACKS ARE LOOSE OR HAVE FALLEN OFF COMPLETELY

NOT CLIMBING

FILTER BAG INSTALLATION

RUN THE CLEANER WITHOUT THE FILTER BAG AND CHECK THE BOTTOM LID/FILTER BAG FOR PROPER INSTALLATION

DEBRIS CAUGHT IN TRACKS/BRUSHES/IMPELLER

CHECK FOR DEBRIS AND CLEAN WITH A GARDEN HOSE/MAY HAVE TO REMOVE IMPELLER CAP (1 SCREW)

FILTER BAG FULL

CLEAN THE FILTER BAG THROUGHLY WITH A GARDEN HOSE

BRUSHES WORN

CHECK THE BRUSHES AND RING (IF APPLICABLE) FOR WEAR. REPLACE IF NECESSARY

POOL CHEMISTRY (ALGAE GROWTH)

HAVE THE WATER CHEMISTRY CHECKED BY A POOL PROFESSIONAL AND/OR BRUSH THE POOL WALLS

CORD TANGLING

FLOATING CORD NOT BEING UNPLUGGED FROM
POWER SUPPLY REGULARLY

MAKE SURE THE CABLE IS BEING UNPLUGGED FROM THE POWER SUPPLY AFTER EVERY 1-2 CYCLES TO RELEASE THE
TENSION THAT BUILDS DURING A CYCLE

EXCESS CORD IN POOL

ONLY USE THE NECESSARY AMOUNT OF CABLE TO COVER THE POOL EFFICIENTLY

CORD NOT BEING UNWOUND BEFORE USE

MAKE SURE THE CABLE IS STRAIGHTENED OUT BEFORE THE CYCLE IS STARTED/WALK THE CLEANER THE LENGTH OF THE
POOL TO STRAIGHTENED CORD

CORD BEING WRAPPED/STORED INCORRECTLY

WHEN WRAPPING THE CABLE, MAKE LARGE LOOPS AND START AT THE CLEANER END SO THE FREE, PLUG END CAN
UNWIND ANY RESIDUAL TENSION

UNIT FLOATING

AIR TRAPPED IN FILTER BAG

ROCK THE CLEANER BACK AND FORTH UNDER WATER TO RELEASE ANY TRAPPED AIR

CLEANER CLIMBING TOO HIGH REGULARLY

A WEIGHT CAN BE ADDED TO THE CLEANER TO PREVENT IT FROM CLIMBING TOO HIGH AND TO ASSIST IN THE DECENT
BACK TO THE FLOOR

D.E. PRESENT IN FILTER BAG

IF THERE IS D.E. IN THE POOL, IT COULD CLOG THE BAG. CLEAN THE BAG THOROUGHLY

 

   

   

 

 

  

     

   

 

Содержание SCRUBBER 60 PLUS NC74S





















Отзывы: