PLEASE CALL 1-888-755-4497 BEFORE RETURNING TO THE STORE.
WWW.SMART-POND.COM
11. For maximum water flow, cut the adapter as shown using a
hacksaw. Fig. 11
Fig. 11
12. Connect the tubing to the inlet of the spillway using the adapter.
Slip the hose clamp on to the tubing but do not tighten it. Fig. 12
NOTE: The spillway has two ports to install the inlet. For installing
with this kit, using connection (a) is preferred. For other
installs use (b).
Fig. 12
13. Tighten the hose clamp using a flathead screwdriver. Fig. 13
Fig. 13
14. Place the Illumifalls spillway onto the wall. Then continue building
the rest of the wall. Fig. 14
NOTE: You will need to cut the stone that goes on the top of the
spillway before building the next layer of stones.
Fig. 14
Cut ring
Connection method (a)
Connection method (b)
